Velocity One-step Polish And Wax
Malco Automotive
- One-step technology — polishes and protects in a single application, cutting time without sacrificing results
- Removes up to P3000 sand scratches — handles light to medium paint correction including swirls and surface imperfections
- Protection lasts up to 90 days — leaves a slick, waxed surface with long-lasting defense after a single treatment
- Dust-free, long working window — apply to the full vehicle before wiping off for maximum efficiency
- Works with orbital polishers, rotary polishers, or by hand — fits any shop's existing equipment and workflow
- Easy wipe-off formula — compound turns from yellow to opaque as a visual cue that it's ready to remove
- Body shop safe — can be used in environments where fresh paint is being sprayed
- VOC compliant
Technical Details
| Case | Each Bottle (16oz) , Case of 6 (16oz Bottles) , Each Unit (1 Gallon (4 L)) Jug , Case of 4 (1 Gallon (4 L) Jugs) |
| Item Weight | 1 lb |
| Package Dimensions | 2.5 x 2.5 x 8.5 in |
| SKU | AP-M265016M |
| Manufacturer | Malco Automotive |
| Brand | Malco Automotive |
| Country of Origin | USA |
| SDS (English) | DOWNLOAD |
| SDS (French) | DOWNLOAD |
| Spec Sheet (English) | DOWNLOAD |
Product Details
VELOCITY™ One-Step Polish and Wax is the ultimate in ease for car paint protection. This two-in-one polish and wax removes light to medium paint defects and gives your vehicle a professional-looking shine for up to 90 days. It’s designed for easy application, one-step polishing and protection, and easy removal. Watch as that little scratch that’s been bugging you vanishes in just one step and paint defects disappear as you apply to your car with ease. This long-lasting treatment will get you through those months that make car care harder, whether it’s snow or sun, know your car’s paint is protected. Show your car you care with this one-step polish and wax.
How to Use?
1. Velocity™ can be used indoors, in a shaded area, or in direct sunlight. For best results, clean and decontaminate the paint surface with Malco CW-37 or a similar car wash product prior to application.
2. For extremely damaged surfaces, a heavy-duty compound such as Tru-Grit or EPIC may be required for initial correction before using Velocity™.
3. Shake before use.
4. Apply 4 medium-sized drops of compound to the pad and work in a crosshatch pattern until the compound turns from yellow to opaque in a 2' x 2' section.
5. To ensure maximum protection, allow the product to flash or dry on the surface before removing with a microfiber towel. The entire vehicle may be polished prior to removal.
Machine settings:
- Orbital polisher: apply at a low-speed setting, then buff at setting 4-6.
- Rotary polisher: apply at the slowest speed, then buff between 1,000-1,400 RPM.
- By hand: use a clean, soft applicator for best results.
Write a Review
Your email address will not be published. Required fields are marked *
Top Reviews
