Epic® Ascend Ceramic Coating Kit
EPIC™
- Bonds with clear coat — creates a slick, high-gloss surface with outstanding depth of gloss
- Hydrophobic and oleophobic barrier — repels water, dirt, water spots, and contaminants, allowing them to slide right off
- Abrasion resistance and enhanced UV protection — defends paint against environmental wear
- 4-year/48,000-mile warranty — long-lasting protection when professionally installed
- Safe for painted surfaces, glass, and plastic trim — versatile coverage in a single product
- Enhanced working time — industry's easiest-to-apply ceramic coating system
Product Details
A professional-grade ceramic coating that bonds with clear coat to deliver a superior high-gloss, "wet" look finish with outstanding hydrophobic, oleophobic, and abrasion-resistant properties. Prevents dirt, water spots, and contaminants from adhering to paint, glass, and plastic trim — backed by a 4-year/48,000-mile warranty when professionally installed. Formulated with enhanced working time to make it the easiest-to-apply coating system in the industry.
How to Use?
EPIC® Ascend Ceramic Coating requires a clean, smooth surface for proper adhesion. Wash, clay bar, and machine polish the vehicle prior to application. We recommend washing with Malco® CW-37™ (#1057) and correcting paint imperfections with the EPIC® Paint Correction System. Only apply in a covered, dust-free garage at room temperature (50°F–75°F) and allow the vehicle to remain inside for at least 24 hours afterward.
1. Put on rubber gloves for protection. Shake product well prior to use.
2. Clean and prep the surface with EPIC® Ceramic Final Prep Wipe (#1097) using a lint-free cloth.
3. Wrap a suede cloth around the applicator pad. For the first application, put 6-8 drops of ceramic coating directly onto the cloth and immediately reseal the product. Put 4-6 drops on the cloth for subsequent applications.
4. Apply the coating to the vehicle surface in a crosshatch pattern using even pressure, working in a defined 20-in x 20-in area until the product is worked into the clear coat.
5. Expect the coated area to rainbow or flash within 30-90 seconds of application. At this point, begin removing the product with a clean microfiber towel. Be sure to remove any remaining residue.
6. Repeat all steps to coat the entire vehicle, using an overlapping technique on each section to ensure full coverage.
7. Keep the vehicle in a controlled environment for at least 12 hours and keep it dry for a minimum of 24 hours. Complete bonding with the paint can take up to seven days — garage access is required.
Write a Review
Your email address will not be published. Required fields are marked *
Top Reviews
