Accelerate - All In One Polish & Protection

Product Details

Accelerate All-In-One Polish and Protection is a one-step polishing compound, designed to remove light to medium paint defects and to leave behind a protective layer. This polishing compound quickly and easily removes swirls, imperfections and light scratches, producing a deep, glossy finish. Formulated for a long working window and dust-free application, Accelerate can be applied with an orbital, a rotary or by hand and is compatible with a variety of foam pads and microfiber applicators. Easy removal of this polishing compound allows for full-vehicle application before wiping off.

How to Use?

For best results clean and decontaminate paint surface with Malco CW-37 or similar car wash and a Kozak Clay Wash Mitt before use.

For extremely damaged surfaces a Heavy-Duty compound such as Tru-Grit or EPIC may be required for initial correction.

SHAKE ACCELERATE WELL. Apply 4 medium sized drops of polish to pad and work in a crosshatch pattern until the compound turns from opaque to clear in a 2’x2’ section. To ensure maximum protection, allow the product to flash or dry on the surface before removing with a microfiber (entire car may be polished prior to removal).

If using an orbital polisher, apply at a low-speed setting, then buff at setting 5-6. If using a rotary polisher, apply at slowest speed and then buff between 1,200-1,400 RPM. If working by hand use a clean, soft applicator for best results.

Accelerate can also be applied to the pad or directly to a panel with a trigger sprayer.

Note: After extensive testing we have determined that Accelerate can be applied in direct sunlight.