MaxFinishing Polish

Product Details

Malco Marine MaxFinishing Polish

Malco Marine MaxFinishing Polish is an advanced all-in-one finishing polish and swirl remover designed to deliver a rich, deep gloss and a swirl-free finish on gel coat, fiberglass, and select painted surfaces. Ideal as the final step after compounding, this professional-grade polish refines the surface, removes light imperfections, and enhances clarity and depth for a showroom-quality shine.

Its water-based formula is easy to use, environmentally friendly, and safe for use in marinas. MaxFinishing Polish contains no silicone, waxes, or fillers, allowing it to produce a true finish without masking defects. Compatible with a wide range of polishing systems and pads, it is an excellent choice for both marine detailers and boat owners seeking professional results.

Features & Benefits

• All-in-one polish and swirl remover
• Creates a rich, deep gloss and swirl-free finish
• Ideal final step after compounding
• Safe for gel coat, fiberglass, and painted surfaces
• Water-based formula for easy cleanup
• Contains no silicone, waxes, or fillers
• Paint-shop safe
• Compatible with most polishing systems and pads
• VOC compliant

Ideal For

• Gel coat restoration
• Fiberglass polishing
• Marine detailing and refinishing
• Removing light swirl marks and haze
• Enhancing gloss after compounding
• Boats, yachts, RVs, and painted marine surfaces

How to Use?

Directions for Use:

1. Shake well before using.
2. Do not apply in sunlight or on warm surfaces.
3. Apply a 1 in. dab of MaxFinishing Polish for a 2 ft x 2 ft section and spread with the polishing pad.
4. Buff at speeds between 1000 to 1600 RPM (1500 RPM for best results).
5. Work the buffer slowly, left to right and front to back, using light to medium pressure. Reduce pressure with each pass.
6. Do not buff to a dry surface. If the surface begins to dry, apply more product and continue to buff.
7. Remove residue after buffing with Express Detailer (#1662) and a clean microfiber cloth.

Pro Tip: For maximum gloss and clarity, use MaxFinishing Polish after Malco Marine MaxProduction or MaxComplete Compound and finish with a foam polishing pad at approximately 1400 RPM.